Oracle B-Tree Index 原理

yangzhiyong77

浏览: 959056 次

最近访客更多访客>>

IT_way

zfantasy789

ls25145

liuys36

博主相关

博客

微博

相册

留言

关于我

文章分类

全部博客 (1167)

社区版块

存档分类

一. B-Tree Index 原理

官网说明：

No index structure can satisfy all needs, but the self-balancing B-tree index comes closest to optimizing the performance of searches on large sets of data. Each B-tree node holds multiple keys and pointers. The maximum number of keys in a node supported by a specific B-tree is the order of that tree. Each node has a potential of order+1 pointers to the level below it.

For example, the order=2 B-tree illustrated in Figure 7-1 has tree pointers: to child nodes whose value is less than the first key, to the child nodes whose value is greater than the first key and less than the second key, and to the child nodes whose value is greater than the second key. Thus, the B-tree algorithm minimizes the number of reads and writes necessary to locate a record by passing through fewer nodes than in a binary tree algorithm, which has only one key and at most two children for each decision node. Here we describe the Knuth variation in which the index consists of two parts: a sequence set that provides fast sequential access to the data, and an index set that provides direct access to the sequence set.

Although the nodes of a B-tree generally do not contain the same number of data values, and they usually contain a certain amount of unused space, the B-tree algorithm ensures that the tree remains balanced and that the leaf nodes are at the same level.

Oracle中的Btree Index具有3大结构，root节点，branch节点，leaf节点. Root节点始终紧跟索引段头. 当索引比较小的时候，root节点，branch节点，leaf节点都存储在同一个block中.

Branch节点主要存储了索引的键值,但是这个键值并不是完整的，它只是完整索引值的部分前缀.同时Branch节点还存储了指向leaf节点的指针(DBA)，另外有个主意的是branch节点中还有个叫kdxbrlmc的指针.

Leaf节点主要存储了完整的索引键值，以及相关索引键值的部分rowid(这个rowid去掉了data object number部分)，同时leaf 节点还存储了2个指针(DBA)，他们分别指向上一个leaf节点以及下一个leaf节点.

Btree Index 是始终平衡的，也就是说从Root节点到 Leaf 节点的任何一个路径都是等距离的.

Btree Index 默认是按照索引值升序排列的，当然了我们可以在创建/重建的时候设置它降序排列.

Index Scan 的时候，采用的是 sequential read,并且一次只能读一个block(INDEX FAST FULL SCAN 除外).

Btree Index Update的时候，先做的是 delete,然后进行insert.

Btree Index 不存储 Null值，但是如果组合索引其中一列是非Null的，那么组合索引也会存储Null值.

二. Tree Index 存储原理

2.1 创建测试数据

SYS@anqing2(rac2)> select * from v$version where rownum=1;

BANNER

----------------------------------------------------------------

Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod

SYS@anqing2(rac2)> create table te as select * from dba_objects;

Table created.

SYS@anqing2(rac2)> select count(*) from te;

COUNT(*)

----------

50258

SYS@anqing2(rac2)> insert into te select * from dba_objects;

50258 rows created.

SYS@anqing2(rac2)> commit;

Commit complete.

SYS@anqing2(rac2)> select count(*) from te;

COUNT(*)

----------

100516

SYS@anqing2(rac2)> create index idx_te_object_name on te(object_name);

Index created.

2.2 查看索引的Blevel, 可以通过DBA_INDEXES.Blevel获得

*-Tree level: depth of the index from its root block to its leaf blocks. A depth of 0 indicates that the root block and leaf block are the same.

--从 root block 到 leaf block的深度. 如果root block 和 leaf block在同一个块中那么 Blevel=0

SYS@anqing2(rac2)> select index_name,blevel from dba_indexes where index_name='IDX_TE_OBJECT_NAME';

INDEX_NAME BLEVEL

------------------------------ ----------

IDX_TE_OBJECT_NAME 2

2.3 查看索引的height，索引的高度等于Blevel+1，height可以通过INDEX_STATS获得

SYS@anqing2(rac2)> select name,height from index_stats where name='IDX_TE_OBJECT_NAME';

no rows selected

--- index_stats需要 analyze ... validate structure 收集一下，否则无数据

SYS@anqing2(rac2)> analyze index IDX_TE_OBJECT_NAME validate structure;

Index analyzed.

SYS@anqing2(rac2)> select name,height from index_stats where name='IDX_TE_OBJECT_NAME';

NAME HEIGHT

------------------------------ ----------

IDX_TE_OBJECT_NAME 3

2.4 dump index

Oracle 提供了分析 Btree index 结构的命令 treedump，在进行treedump之前需要获得索引的object_id

SYS@anqing2(rac2)> select object_id from dba_objects where object_name='IDX_TE_OBJECT_NAME' and owner='SYS';

OBJECT_ID

----------

54769

SYS@anqing2(rac2)> oradebug setmypid

Statement processed.

SYS@anqing2(rac2)> alter session set events 'immediate trace name treedump level 54769';

Session altered.

SYS@anqing2(rac2)> oradebug tracefile_name

/u01/app/oracle/admin/anqing/udump/anqing2_ora_3865.trc

2.5 查看 treedump trace 文件

[oracle@rac2 ~]$ cat /u01/app/oracle/admin/anqing/udump/anqing2_ora_3865.trc

/u01/app/oracle/admin/anqing/udump/anqing2_ora_3865.trc

Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production

With the Partitioning, Real Application Clusters, OLAP, Data Mining

and Real Application Testing options

ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1

System name: Linux

Node name: rac2

Release: 2.6.18-194.el5

Version: #1 SMP Tue Mar 16 21:52:43 EDT 2010

Machine: i686

Instance name: anqing2

Redo thread mounted by this instance: 2

Oracle process number: 29

Unix process pid: 3865, image: oracle@rac2 (TNS V1-V3)

*** 2011-06-27 13:15:00.375

*** ACTION NAME:() 2011-06-27 13:15:00.371

*** MODULE NAME:(sqlplus@rac2 (TNS V1-V3)) 2011-06-27 13:15:00.371

*** SERVICE NAME:(SYS$USERS) 2011-06-27 13:15:00.371

*** SESSION ID:(130.55497) 2011-06-27 13:15:00.371

----- begin tree dump

branch: 0x4117c2 4265922 (0: nrow: 2, level: 2)

branch: 0x412086 4268166 (-1: nrow: 250, level: 1)

leaf: 0x4117c3 4265923 (-1: nrow: 182 rrow: 182)

leaf: 0x4117c4 4265924 (0: nrow: 182 rrow: 182)

leaf: 0x4117c5 4265925 (1: nrow: 186 rrow: 186)

leaf: 0x4117c6 4265926 (2: nrow: 189 rrow: 189)

leaf: 0x4117c7 4265927 (3: nrow: 186 rrow: 186)

leaf: 0x4117c8 4265928 (4: nrow: 190 rrow: 190)

leaf: 0x4117c9 4265929 (5: nrow: 186 rrow: 186)

leaf: 0x4117ca 4265930 (6: nrow: 178 rrow: 178)

leaf: 0x4117cb 4265931 (7: nrow: 187 rrow: 187)

leaf: 0x4117cc 4265932 (8: nrow: 182 rrow: 182)

......

leaf: 0x412080 4268160 (244: nrow: 222 rrow: 222)

leaf: 0x412081 4268161 (245: nrow: 201 rrow: 201)

leaf: 0x412082 4268162 (246: nrow: 240 rrow: 240)

leaf: 0x412083 4268163 (247: nrow: 226 rrow: 226)

leaf: 0x412084 4268164 (248: nrow: 211 rrow: 211)

branch: 0x41227b 4268667 (0: nrow: 245, level: 1)

leaf: 0x412085 4268165 (-1: nrow: 229 rrow: 229)

leaf: 0x412087 4268167 (0: nrow: 218 rrow: 218)

leaf: 0x412088 4268168 (1: nrow: 231 rrow: 231)

leaf: 0x412109 4268297 (2: nrow: 249 rrow: 249)

......

leaf: 0x412278 4268664 (241: nrow: 191 rrow: 191)

leaf: 0x412279 4268665 (242: nrow: 180 rrow: 180)

leaf: 0x41227a 4268666 (243: nrow: 56 rrow: 56)

----- end tree dump

2.6 解释 treedump 输出

branch 表示的是 branch block ，它后面跟了一个十六进制表示的DBA(data block address)，以及用10进制表示的DBA 。

DBA 之后表示在同一层次的相对位置(root 从0开始,branch 以及leaf从 -1开始)

nrow 表示块中包含了多少条目(包括delete的条目)

rrow 表示块中包含的实际条目(不包括delete的条目)

level 表示从该block到leaf的深度(leaf没有 level)

2.6.1 branch: 0x4117c2 4265922 (0: nrow: 2, level: 2) 说明

这个 branch block 的 level 为2，也就是说从这个branch block 到 leaf block 的深度为2,根据前面的查询，这个索引的Blevel为2,所以这个branch其实是 root block. 其实根据 nrow:2 也可以看出来它是root block，因为nrow:2 说明它只包含了2个条目，那么这2个条目其实就是dump 文件中的其他2个 branch block 的条目

现在我来验证一下 branch: 0x4117c2 4265922 (0: nrow: 2, level: 2) 是不是 root block , 我查询这个 branch 的 DBA 。

SYS@anqing2(rac2)> select dbms_utility.data_block_address_file('4265922') FILE_ID, dbms_utility.data_block_address_block('4265922') BLOCK_ID from dual;

FILE_ID BLOCK_ID

---------- ----------

1 71618

Btree 索引的 root block总是segment header+1,所以我查询该索引的段头

SYS@anqing2(rac2)> select header_file,header_block from dba_segments where segment_name='IDX_TE_OBJECT_NAME';

HEADER_FILE HEADER_BLOCK

----------- ------------

1 71617

那么现在已经证明了 branch: 0x4117c2 4265922 (0: nrow: 2, level: 2) 是root block, 其实 treedump第一个 branch block 就是 root block。

2.6.2 branch: 0x412086 4268166 (-1: nrow: 250, level: 1) 说明

这个branch 的 DBA为0x412086 (十六进制)，4268166 (十进制) ，-1 表示它是与它在同一个深度的 branch block中的第一个 branch block。

nrow: 250 ：表示它有247个 leaf block.

level: 1 ：表示这个 branch block 到 leaf block的深度为1

2.6.3 leaf: 0x4117c3 4265923 (-1: nrow: 182 rrow: 182) 说明

leaf 表示它是一个 leaf block 0x4117c3 4265923 分别是这个 leaf block 的十六进制/十进制的DBA.

-1 表示它是 leaf block 中的第一个 block

nrow: 182 表示它一共有182条记录

rrow: 182 表示它实际有182条记录

2.7 branch block dump

这里选择dump branch: branch: 0x412086 4268166 (-1: nrow: 250, level: 1)

SYS@anqing2(rac2)> select dbms_utility.data_block_address_file('4268166') FILE_ID, dbms_utility.data_block_address_block('4268166') BLOCK_ID from dual;

FILE_ID BLOCK_ID

---------- ----------

1 73862

SYS@anqing2(rac2)> oradebug tracefile_name

/u01/app/oracle/admin/anqing/udump/anqing2_ora_3865.trc

-- 先清空一下

[oracle@rac2 ~]$ cat /dev/null > /u01/app/oracle/admin/anqing/udump/anqing2_ora_3865.trc

SYS@anqing2(rac2)> alter system dump datafile 1 block 73862;

System altered.

2.7.1 部分 DUMP 文件

[oracle@rac2 ~]$ cat /u01/app/oracle/admin/anqing/udump/anqing2_ora_3865.trc

*** 2011-06-27 14:35:54.038

Start dump data blocks tsn: 0 file#: 1 minblk 73862 maxblk 73862

buffer tsn: 0 rdba: 0x00412086 (1/73862)

scn: 0x0000.004e24ec seq: 0x02 flg: 0x04 tail: 0x24ec0602

frmt: 0x02 chkval: 0x3371 type: 0x06=trans data

Hex dump of block: st=0, typ_found=1

Dump of memory from 0x0E707400 to 0x0E709400

E707400 0000A206 00412086 004E24EC 04020000 [..... A..$N.....]

......

E7093F0 00000000 00000000 00000000 24EC0602 [...............$]

Block header dump: 0x00412086

Object id on Block? Y

seg/obj: 0xd5f1 csc: 0x00.4e24c9 itc: 1 flg: - typ: 2 - INDEX

fsl: 0 fnx: 0x0 ver: 0x01

Itl Xid Uba Flag Lck Scn/Fsc

0x01 0xffff.000.00000000 0x00000000.0000.00 C--- 0 scn 0x0000.004e24c9

Branch block dump

=================

header address 242250820=0xe707444

kdxcolev 1

KDXCOLEV Flags = - - -

kdxcolok 0

kdxcoopc 0x80: opcode=0: iot flags=--- is converted=Y

kdxconco 2

kdxcosdc 0

kdxconro 249

kdxcofbo 526=0x20e

kdxcofeo 557=0x22d

kdxcoavs 31

kdxbrlmc 4265923=0x4117c3

kdxbrsno 0

kdxbrbksz 8056

kdxbr2urrc 0

row#0[8023] dba: 4265924=0x4117c4

col 0; len 24; (24):

2f 31 30 64 65 32 32 63 36 5f 43 6c 61 73 73 54 79 70 65 49 6d 70 6c 32

col 1; len 3; (3): 00 41 1b

row#1[7984] dba: 4265925=0x4117c5

col 0; len 30; (30):

2f 31 31 64 35 30 39 31 32 5f 44 61 74 65 46 6f 72 6d 61 74 5a 6f 6e 65 44

61 74 61 5f 7a

col 1; len 3; (3): 00 41 1c

row#2[7973] dba: 4265926=0x4117c6

col 0; len 5; (5): 2f 31 32 61 32

col 1; TERM

row#3[7931] dba: 4265927=0x4117c7

col 0; len 30; (30):

2f 31 33 38 35 32 32 37 66 5f 4d 61 70 52 65 67 69 6f 6e 43 6f 6e 74 61 69

6e 6d 65 6e 74

col 1; len 6; (6): 00 41 18 d5 00 08

......

row#247[571] dba: 4268163=0x412083

col 0; len 6; (6): 41 4c 4c 5f 45 56

col 1; TERM

row#248[557] dba: 4268164=0x412084

col 0; len 8; (8): 41 4c 4c 5f 4d 50 5f 50

col 1; TERM

----- end of branch block dump -----

End dump data blocks tsn: 0 file#: 1 minblk 73862 maxblk 73862

[oracle@rac2 ~]$

2.7.2解释部分dump输出

kdxcolev 1 --该block到leaf block的深度(leaf block 为0).这里branch block 的level 为1 与前面查询相吻合

KDXCOLEV Flags = - - -

kdxcolok 0 --表示是否有事务lock了这个branch block，如果有，有多少事务

kdxcoopc 0x80: opcode=0: iot flags=--- is converted=Y

kdxconco 2 --索引值条目. 这里表示有2个条目

kdxcosdc 0 --这个block的结构被更改次数.这里0表示没有更改

kdxconro 249 --索引条目(不包含kdxbrlmc 指针)

kdxcofbo 526=0x20e --空闲空间的起始偏移量

kdxcofeo 557=0x22d --空闲空间的末尾偏移量

kdxcoavs 31 --block中的空闲空间=kdxcofeo-kdxcofbo

kdxbrlmc 4265923=0x4117c3 --如果index value小于row#0，指向该 block 的地址

kdxbrsno 0 --最后被更改的索引条目

kdxbrbksz 8056 --块中的可用空间

kdxbr2urrc 0

row#0[8023] dba: 4265924=0x4117c4 --row# 表示索引条目数，从0开始，紧接着就是十进制和十六进制的DBA，该DBA指向 leaf block

col 0; len 24; (24): --列的行号，从0开始，紧接着的就是列的长度以及列的值，那么这个值称之为separator key,这个separator key 可以区分真实的索引值，所以从这里我们也知道 branch block不会存储完整的索引值，只要能区分就行

2f 31 30 64 65 32 32 63 36 5f 43 6c 61 73 73 54 79 70 65 49 6d 70 6c 32

col 1; len 3; (3): 00 41 1b

2.8 leaf block DUMP

这里选择 row#247[571] dba: 4268163=0x412083, 因为它包含的索引键很少

row#247[571] dba: 4268163=0x412083

col 0; len 6; (6): 41 4c 4c 5f 45 56

col 1; TERM

dump 之前先看一下 row#247[571] 存储的 ' 41 4c 4c 5f 45 56' 是什么索引键. 使用如下代码转换：

SQL> set serveroutput on

/* Formatted on 2011/6/27 16:53:27 (QP5 v5.163.1008.3004) */

DECLARE

n VARCHAR2 (2000);

BEGIN

DBMS_STATS.convert_raw_value ('41', n);